Hose clamp installation program

Before assembly on the welded plate assembly, to better determine the direction of the hose clamp, suggested in a fixed place ready first, after welding on welding, embedded in the lower part of the hose clampbody, put on the pipe should be fixed. Put the other half hose clampbody and cover plate, with a screw. Avoid direct welding has installed hose clampplate.
Folded assembly, based on the guide rail welding in, or with screws, first to pack up and down half of the hose clampbody, put that need to be fixed on the tube put up half of the hose clampbody, with the screw, through the locking plate prevent it from turning. Then install the second tube hose clamp to the above method.
Bend pipe assembly, assembly bent pipe, shall be directly on the bend in the front and the rear insein hose clampis fixed. Suggested that this should be a fixed position of supporting points.

(resource:http://www.kg-machinery.com/news/hose-clamp-installation-program.html)

The kinds of Angle valve and action

The effect of Angle valves:

1, the transfer inside and outside the outlet.

2, is the water pressure is too big, can be in above the triangle valve adjustment, turn down,

3, is a function of the switch, if the faucet leaks are like, may turn off the triangle valve, don't have to close the total valve in the home.

4, is the beauty is generous. So, water is essential to the bridal chamber is decorated commonly dimming accessories, when decorate bridal chamber so designer would have mentioned it.

The role of the toilet Angle valve:

First. The silk hole on metope can be connected to a hose wire inside hole section

Second, can cut off the water for future maintenance and repair of the toilet

Third, can adjust the water pressure of water control, to protect the normal use of the toilet sanitary ware (this is relatively small, unless you are the water pressure is oversized)

Pneumatic Angle valve:

automatic control system in the common line switch, is widely used in knitting, printing and dyeing, washing, bleaching, food, chemical industry, water treatment, medicine and other automatic machinery and equipment, with no water, no noise, reliable sealing performance, etc.

(resource:http://www.kg-machinery.com/news/the-kinds-of-angle-valve-and-action.html)